Retrying OS detection (try #2) against Meross_Smart_Plug (192.168.1.51)Ĭompleted Traceroute at 00:00, 0.02s elapsed WARNING: RST from 192.168.1.51 port 23 - is this port really open? Initiating OS detection (try #1) against Meross_Smart_Plug (192.168.1.51) Scanning 2 services on Meross_Smart_Plug (192.168.1.51)Ĭompleted Service scan at 23:57, 16.01s elapsed (2 services on 1 host) Ignoring time.Ĭompleted SYN Stealth Scan at 23:57, 28.29s elapsed (1000 total ports) RTTVAR has grown to over 2.3 seconds, decreasing to 2.0Īdjust_timeouts2: packet supposedly had rtt of 13024986 microseconds. at 23:56Ĭompleted Parallel DNS resolution of 1 host.

Initiating Parallel DNS resolution of 1 host.

Try power cycling or resetting the box.Completed Ping Scan at 23:56, 0.04s elapsed (1 total hosts)

It may take a while (30+ seconds) the first time. Once you have a successful upload, the box should reboot. If that fails, try the reset cycle again and try adjusting your timing ( both shorter and longer) between restoring the power and starting the upload. Immediately release the reset button and start the TFTP upload. While still holding it down, unplug the unit from another 30 seconds. Hold down the reset button on the back for 30 seconds. Next is to do a hard reset on the linksys. The goal is to get it already to make the connection with the push of a button. ''Once you have the IP addressing assigned, start the TFTP CLIENT, give it the address of the WRT54G fill in the default password ('admin') point it to the flash image and choose binary mode if given the option. So happy that i had succesfully flash my wrt54g v5 with micro dd-wrt version.Īt 1st got problem TFTP the firmware up.

Firmware dd wrt v24 sp3 download